It’s a three-part miniseries on gadgets now that I’m back from Las Vegas. If you’ve followed my Flickr then you’ll know what I’m about to talk about. Techie geekery starts here. Yes, I probably shouldn’t get quite so worked up about technology, but here I am.
One thing that I’ve not found that easy to get hold of is an external enclosure for SATA disks. IDE/USB caddies have been pretty widely-available for a while now, but most disks now use the SATA interface so I needed something that would let me backup my Thinkpad onto a spare 200Gb 2.5″ disk I’d been given.
I had a look through a bunch of enclosures in Frys and I have to say I just pretty much went with what seemed simplest (a NexStar SX from Vantec), without really spending too much time on the features… the decision was mainly based on cost ($20) and size. So when I finally (!) got around to opening the box today, I was completely astounded at the quality of the product, given the cost.
The box itself was solid cardboard (not the flimsy sort of stuff I’d expected). Inside was a soft carry case, and inside that was the metal enclosure itself. The product also ships with a USB cable with a “pass through” socket which seems to enable more devices to be attached, a driver disk, some screws and a screwdriver – very complete.
Once I took the enclosure out of the carry case I had another pleasant surprise. It’s metal and very compact. There are two small squeeze clips at the back… press them in and the top and bottom are released to slide off. The other USB enclosure I’ve previously purchased was really poor compared to this, with ugly screw lugs on the top and a very loose lid… this thing is really elegant.
The only small issue I had was that the Hitachi drive I’d been supplied for my Thinkpad initially would not fit into the actual case, because it is so compact. The side screws made the drive just a little too wide to fit. I had to remove the top cover of the drive (see photo), but since Vantec provided a screwdriver this was no big deal.
That’s really all I have to say, but I just wanted to point out that this seems to be a really good quality bit of kit at a decent price. I probably ought to look for a 3.5″ version and then I can whip out the drives from my old Linux tower before decommissioning it!